水性环氧底漆性能特点及适用范围:
水性环氧底漆是双组分水性环氧树脂涂料,A组分为水性环氧树脂及相关水性;B组分主要是水性环氧固化剂。主要用于水性环氧地坪漆的底层涂装,能充分地渗入混凝土结构的毛细孔,具有优异的,其整体无缝和平整的表面使得清洁和维护变得十分容易,它具有优异的耐磨性、耐冲击性,耐酸、碱、盐等多种化学品的腐蚀,附着力强,低VOC含量,环保,气味小,安全性高,透气性优异,不鼓泡,光泽柔和,以水作为分散介质,可在潮湿的环境中施工。是沙发环氧地坪构建体系中最基础的结构系统。可加入适量的石英砂、石英粉作为中涂批刮。适用于医院、食品厂、超市、乳品厂和化妆品厂等需要保持高度清洁的地面及潮湿环境,如地下停车场、一楼地面,要求气味小的场合。
水性环氧底漆施工温度不低于10℃,环境湿度<90%。涂膜实干前严禁接触水、溶剂等介质。严禁承压,踩踏。环境温度25℃时,涂膜完全固化需要7天;温度越低,完全固化时间越长;温度越高,完全固化时间缩短。详情可咨询迈森相关专业技术人员。
Waterborne epoxy primer is a two·component epoxy resin coating, a group is divided into water·based epoxy resin and water·based;
B component is mainly of waterborne epoxy curing agent. Mainly used for the bottom coating of waterborne epoxy floor paint,
can fully penetrate into the concrete structure of the pores, with excellent, its overall seamless and smooth surface makes the cleaning
and maintenance becomes very easy, it has excellent wear resistance, impact resistance, corrosion of acid, alkali, salt and other chemicals,
strong adhesion, low VOC content, environmental protection, low odor, high safety, excellent air permeability, no blister, luster and soft,
with water as the dispersion medium, in the humid environment construction. Is the most basic structure of the system
in the construction of the epoxy floor sofa. With quartz sand, quartz powder amount as coatingscraping.
For keeping a clean ground and humid environment in hospital, food factories, supermarkets, dairy factory and cosmetics factory,
such as underground parking, ground floor, small smell and occasions.
Waterborne epoxy primer construction temperature of not less than 10 degrees, relative humidity is less than 90%.
The film work before the forbidden contact with water, solvent media.
No pressure, tread. Ambient temperature of 25 DEG C, film completely cure need 7 days; temperature is low, completely curing time is long;
the higher the temperature completely curing time relationship.
Details of the relevant professional and technical personnel consulting meiseen.
|